364 stroke range................+/- 0.5 to 4.0 in. non-linearity (max.) ................+/- 0.25% full scale output sensitivity................see table above noise................30 mv p-p temperature, operating................-40 to 158f t emperature, effect zero (max.)................0.005% full scale/f span (max.)................0.015% full scale/f pressure rating, s td.................150 psi, up to 3,000 psi with cable options element type................dc-dc lvdt input supply (accept able)................+/- 10 to 20 vdc unregulated (45 ma max.) or 20 to 40 vdc unregulated (45 ma max.) electrical termination................submersible mating connector with 16.5? cable material................stainless steel probe material................stainless steel armature t ype ................ free unguided probe thread................m5 x 0.8? spring force (max.)................not applicable dimensions performance environmental electrical mechanical www.honeywell.com/sensotec n submersible n stainless steel n +/- 0.5 to +/- 4.0 in. range model dw7u dc-dc submersible* lvdt order code ay250 *not recommended for salt water use. consult factory for saltwater submersible applications. range codes available stroke ranges l (in.) x (in.) weight armature (oz.) typical f.s. output hp +/- 0.5 in. 8.00 1.5 0.75 +/- 5 vdc hq +/- 1.0 in. 9.10 2.5 1.0 +/- 5 vdc hr +/- 2.0 in. 13.95 3.0 1.5 +/- 5 vdc hs +/- 3.0 in. 18.52 4.5 3.0 +/- 5 vdc ht +/- 4.0 in. 19.80 5.0 3.7 +/- 5 vdc 2.44 in. ? 0.812 in. ? 0.187 in. 0.6 in. x nominal electric zero point submersible connector 2-nuts & 2-washers supplied 4-conductor, cable 16.5ft. long l 1-888-282-9891 wiring codes dual power supply brown (+) supply (+10 to +20 vdc) blue (-) supply (-10 to -20 vdc) black (-) output common/ supply return white (+) output +/-5 vdc (min. 2k ohm across black and white) reverse polarity protected with voltage regulator. cable shield is not connected to transducer. single power supply brown (+) supply (+20 to +40 vdc) blue supply return black (-) output white (+) output +/-5 vdc (min. ohm across black and white) reverse polarity protected with voltage regulator. cable shield is not connected to transducer . either black or blue must float. if both are grounded or connected together, the unit will be destroyed.
365 www.honeywell.com/sensotec 1-888-282-9891 typical system diagram range range code +/- 0.5 in. hp +/- 1.0 in. hq +/- 2.0 in. hr +/- 3.0 in. hs +/- 4.0 in. ht range codes special customer requirements (consult factory) options how to order the order code consists of the product model, the desired range code and the available options. model code range code options code sample code: ay250 hq l10 mineral insulated welded st ainless steel sheathed cable 0.12? diameter cable 1 to 164 ft. lengths available -67 to 390 f 3,000 psi output options of 0-10 or 4-20 ma available t .e.d.s. ieee 1451.4 module signature calibration model dw7u supplied as st andard model dw7u fast track delivery built to order stroke ranges +/- 0.5 to 4.0 in. electrical termination submersible mating connector with 16.5? cable opt1. no connector or cable, terminated with soldier pins electrical cable orient ation opt7. radial outlet sub- mersible connector with 16.5? cable improved linearity l10. +/- 0.1% max. linearity (less than or equal to +/- 4 in.) a c input display unit s sc500 s c1000 sc2000 s c3004 customer supplied chart recorder alarm panel d ata acquisition computer p lc mounting blocks aa937 mounting options rod end bearing approved -not rohs compliant
|
